1800-425-2383 | 94440 82770 | 94440 82750

Water Tank Epoxy Coating

Our Brochures

ADHERE COAT 403.pdf
Water Tank Waterproofing

ADHERE COAT 403

Adhere Coat 403 is a solvent free, non-toxic, high build epoxy resin protective coating with outstanding chemical and mechanical properties. Adhere Coat 403 is supplied as a two component product in pre-weighed base and hardener packs, ready for site mixing.

  • - Approved for use in contact with potable water.
  • - Produces a seamless, glossy, glass-like surface that is both easy to clean and does not induce bacterial and fungal growth.
  • - Excellent resistance to a variety of chemicals.
  • - Easy to clean with a smooth, hard and glossy finish.
  • - Non-toxic.
  • - Exhibits good mechanical properties.
  • - Resistant to sewage effluents.

Adhere Coat 403 can be applied by brush; roller or airless spray machine. The first coat should be applied to obtain a continuous uniform coating. The second coat should be applied within the over coating time to achieve the maximum adhesion between the two coats.

  • - Heavy duty protective coating for concrete and steel.
  • -Internal protective lining for potable water concrete or steel tanks.
  • - Heavy duty wall and floor coating in food processing plants, grain silos, dairies, breweries, hospitals, pharmaceutical industries and car parks.
  • - Approximately 0.30 - 0.35 kg/m2 per coat. Two coats should be applied to achieve a total of 400 microns dry fi lm thickness.
  • - Occasional Spillage.Chemical Resistance after full cure (7 days @ 25oC),
Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.