1800-425-2383 | 94440 82770 | 94440 82750

BITUMAN EMULSION WATERPROOFING

Our Brochures

ADHERE-BONDS-BITU-COAT.pdf
Water Tank Waterproofing

ADHERE BONDS - BITU COAT

ADHERE BONDS - BITU COAT is an emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.

  • - Resists the attack of salts like chlorides and sulphates that are present in the soil.
  • - Easy to apply
  • - Cold applied
  • - Adheres to concrete
  • - Can be applied in closed or confined spaces
  • - Water-based
  • - Non-flammable
  • - Versatile
  • - Economical

ADHERE BONDS - BITU COAT is used for providing damp proofing for below ground concrete structures which are above the water table. The coating is also used as a moisture vapor barrier on block works and concrete surfaces prior to cladding. This can also be used as the protective coating for built up roofing systems along with fabric

  • - The drums and pails must be stored in a covered area, away from direct sunlight, UV and other sources of heat.
  • - The shelf life is up to 12 months when stored as per recommendations.
  • - Excessive exposure to sunlight, UV and other sources of heat will result in considerable deterioration of the product and reduce its shelf life.
  • - When applied at 4m²/ Ltr/ coat, the dry film thickness achieved will be 125 microns. Further coats shall be applied only after the previous coat dries off completely.
Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.