Concrete Leveling

service image


Self Level 1000 Mic / 2000 Mic., is a solvent-free, pigmented three component pure liquid epoxy resin cured of a special amine hardener self-leveling for industrial epoxy flooring.

  • - Easy to mix and apply
  • - Will not crack or shrink
  • - Long open time
  • - Self-smoothing and self-hardening
  • - Suitable for use from feather edge to 100mm sheeting
  • - In one application
  • - Can be walked on after 2 hours
  • - Tile after 3 hours
  • - Concrete
  • - Cement screeds
  • - Over existing tiles
  • - Particleboard flooring
  • - Compressed fibrous cement.
  • - Do Not add extra water
  • - Do not use externally
  • - Do not hand mix
  • - Do not use in areas with constant water contact
  • - Minimum thickness over particleboard flooring is 3mm
  • - Operating temperature to 40ºC
  • - Concrete substrate must be at least 21 days old

Pour the correctly mixed Self Leveling Compound on to the prepared substrate and allow it to find its own level. To ensure a uniform consistency and continuous flow, it is advisable that subsequent mixes are ready once the previous pour has been laid until the entire area is leveled. Do not allow traffic in the area until the area has hardened

Self-Leveling Compound requires exactly 5.5 to 6 liters of clean water per 25kg Pail. Mixing must be carried out using a mechanical mixer. Add the correct amount of water into clean mixing pail and slowly add the self-Leveling Compound powder to the water with continuous mixing. Mix for 2 minutes. The product is now ready for use.Do not add excess water and do not mix by hand.


Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.