tile joint filler is a high quality fine, water-resistant cement based powder grouting compound designed for grouting glazed wall tiles, mosaic, vitrified and fully vitrified tiles, ceramic floor tiles, industrial floor tiles etc. where chemical resistant is important to use our (Epoxy Tile Joint Grout).
Mix the ADHERE BONDS-CTG with clean water until a lump-free smooth paste of uniform color is obtained. If an electric drill mixer is used blend at a slow speed (less than 300rpm). Avoid entraining air by mixing at too high speed or by over-mixing. Do not reconstitute the mixed grout by adding more water, this will reduce the final strength..
((Tile length + Tile breadth) x Tile thickness x Specific gravity)((Tile length + Joint width) x (Tile breadth + Joint width))= Kg/m2
Before commencing grouting the adhesive bed must be set. Fix in a solid bed of adhesive i.e. ensuring that, as far as possible no voids are left behind / beneath the tiles. Protect open joints from contamination and ensure that they are clean, dry and free loose debris prior to grouting. Do not use in a damp condition.
Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.