Epoxy Tile Joint Grout



The Versatile, durable, hygienic, hard-wearing, impermeable, epoxy tile joint filler with the high degree of resistant to chemical attack, abrasion, and impact does not permit the entry of bacteria or dirt and is easily maintained in a sterile condition for interior and exterior.

  • - Manufactured under BSI Quality Assurance scheme ISO 9001
  • - Resistant to chemicals
  • - Impermeable to liquids and easy to sterilize, clean and maintain
  • - High bond strength
  • - Easy to use
  • - Available colors:
  • - Grey, White, Ivory, Yellow, Pink, dark green, terracotta, dark grey, silver grey, black etc.

Before commencing grouting the adhesive bed must be set. It is essential that the tiles used are appropriate for the service conditions and are fixed in a solid bed of adhesive i.e. ensuring that, as far as possible, no voids are left behind / beneath the tiles. Protect open joints from contamination and ensure that they are clean, dry and free lose debris prior to grouting..

  • - ((Tile length + Tile breadth) x Tile thickness x Specific gravity)((Tile length + Joint width) x (Tile breadth + Joint width)) = Kg/m2,PACKING:-ADHERE BONDS-ETG 5Kg Packing 1Kg Packing
  • - COMPOUND-A (RESIN) 1.0 Kg 0.2 Kg
  • - COMPOUND-B (HARDENER) 0.5 Kg 0.1 Kg
  • - COMPOUND-C (FILLER) 3.5 Kg 0.7 Kg

All surfaces must be rigid, dry, clean and sound. Wire brush the surface and then wash down with water and allow drying. Any voids or defects must be repaired beforehand and allowed to fully set


Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.