Liquid Membrane Waterproofing

waterproofing membrane

ADHERE FLEX

Single Component is a unique single component acrylic co-polymer waterproofing elastomeric membrane provides a extremely tough durable coating and it allows the concrete to breathe..

Due to its excellent adhesion and thixotropic nature it is an ideal material for vertical and horizontal applications.

  • - Weather proof protective coating.
  • - Excellent thermal insulation.
  • - Can be used on a variety of substrates such as concrete, asbestos, cement, zinc and GI sheets, timber, light weight concrete polyurethane foam.
  • - High elasticity and tensile strength of the cured membrane enables it to accommodate roof movement.
  • - Easy to use, single component and bio-friendly material.
  • - Resistant to ultra violet radiation.
  • - Anti carbonation and chemicals resistant coating.

For roof slabs, terraces, balconies, sunshades, parapet walls, domes, arches, shells, folded plates, parboloids and corrugated sheets. For water proofing of new structures as well as old surfaces. For negative side water proofing..

First coat of Adhere Flex shall be applied over the primed surface once the surface is dry. It is recommended to apply the second coat after first coat is fully cured. The glass fiber reinforcement, if required shall be placed after the application of the first coat when Adhere Flex is still wet. ADHERE FLEX shall be diluted up to 15 – 25% for first coat and 10 – 15% for second coat for second coat for workability and coverage.,PACKING:-1,5,25kgs..

Due to its excellent adhesion and thixotropic nature it is an ideal material for vertical and horizontal applications.

Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.