Flexible Waterproofing



ADHERE PLUS Water Proof Coating is a polymer modified mortar, supplied in powder form. Once mixed with water, produces a decorative coating that is easily placed in a single layer with good waterproofing performance

  • - Waterproof against rainwater and permeable to water vapour.
  • - Single component. Only requires water for preparing the mix.
  • - Applied in a single layer. Excellent coverage and savings in man-hours.
  • - Long lasting and low maintenance. Cleaned with water, with or without pressure.

Protection against weathering and for waterproofing of concrete, cementitious renders, concrete blocks, natural stones and bricks. For interior and exterior application

ADHERE PLUS is mixed only with clean water. The average amount recommended is about 25%, which is equivalent to 6.25 litres of water per 25 kg of ADHERE PLUS. Mixing can be done mechanically or by hand. When mixing by mechanical means add gradually the powder to the water and mix with a low speed mixer (400-600) until obtaining a lump free, homogeneous mix. Allow the mix to rest for 2 min, after which application can begin.

During the application, the substrate must be kept damp. The application can be done using a fine haired brush / roller / mortar spraying machine. A single coat is applied striving to cover the surface completely. In case a second coat was needed, it can be applied between 12 - 24 hours after the application of the first one. Tools are cleaned with water immediately after the application.


Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.