1800-425-2383 | 94440 82770 | 94440 82750

Epoxy injection grout

Our Brochures

ADHEREX-16.pdf
epoxy-injection-grout

ADHEREX–16

Pourable epoxy resin grout(3-part)

  • A High-Strength grouting and fixing of: Starter bars, Anchors, Fasteners, Tie rods, Crash barrier posts, Fence and railing posts.
  • Under-grouting and bedding of : Base plates, Machine bases, Seat base-plates for light and heavy machinery including heavy impact and vibratory machinery, reciprocating engines compressors, pumps, presses etc, Bridge bearings, Mechanical Joints (i.e. road/ bridge/deck types etc)
  • Sleeper-less, direct rail fixing: Crane tracks, Light rail and permanent way in tunnels, Light rail and permanent way over bridges.
  • Characteristics/ Advantages High Early Strength, Ready-to –mix / Pre batched units, Non-shrink Corrosion and chemically resistant, Stress and impact resistance, High Compressive Strength, High Vibration resistance, Low coefficient of thermal expansion.

Consumption / Dosage : 2000kg /m3 Substrate Quality : Verify the substrate strength (concrete, masonry, natural stone). the substrate surface (all types) must be clean and free from Contaminants such as dirt, oil, grease, existing surface treatments and coatings etc. steel substrates must be de-rusted. The substrate must be sound and all loose particles must be removed.

12 months from date of production if stored properly in original unopened, sealed and undamaged packaging, in dry conditions at temperatures between +10 °C and +35 °C. Protect from direct sunshine.

Mixing : Part A : B : C = 2 : 1 : 12 by weight (Standard)

Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.