1800-425-2383 | 94440 82770 | 94440 82750

Tile Grout Additive

Our Brochures

ADHERE BONDS-TGL.Pdf
tile-grout-additives

ADHERE BONDS – TGL

Tile Grout Modifier polymer emulsion for use with cement based grouts. Suitable for use in interior and exterior tile joints locations in both dry and wet service conditions.

Grout modified with ADHERE BONDS – TGL should be applied as directed above. The working time of the polymer modified grout may be shorter than that of the unmodified material, especially in higher temperature. The color of the set grout may appear slightly darker than when unmodified. Use the same mix proportions throughout an installation to ensure uniform color.

  • - Increased mechanical strength.
  • - Providing greater adhesion to tile edges e.g. glass mosaics and fully vitrified tiles.
  • - Providing greater abrasion resistance. Particularly important in heavily trafficked areas such as shopping malls.
  • - Increased flexural strength and flexibility.
  • - Enabling grouts to be used where limited movement/vibration is anticipated e.g. plaster board and timber floors.
  • - Reduced water permeability
  • - Providing greater protection to water sensitive backgrounds and minimizing the risk of efflorescence.
  • - Do not use showers for at least 2 weeks after completion of grouting
  • - Do not fill pools at least 3 weeks after completion of grouting

Dilute 1 part of ADHERE BONDS – TGL with 2 parts of water. (approx. add 0.7-1.5 liters of ADHERE BONDS – TGL to 10 Kg grout.) For increased product performance in more demanding situations such as tiling to timber floors, dilute with an equal volume of water. Use this liquid to mix GROUT for the application.

Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.