Cementitious Water- resistant additive and bonding agent for cementitious systems based on styrene-butadiene rubber latex.
Grout modified with ADHERE BONDS – TGL should be applied as directed above. The working time of the polymer modified grout may be shorter than that of the unmodified material, especially in higher temperature. The color of the set grout may appear slightly darker than when unmodified. Use the same mix proportions throughout an installation to ensure uniform color..
Dilute 1 part of ADHERE BONDS – TGL with 2 parts of water. (approx. add 0.7-1.5 liters of ADHERE BONDS – TGL to 10 Kg grout.) For increased product performance in more demanding situations such as tiling to timber floors, dilute with an equal volume of water. Use this liquid to mix GROUT for the application
Grout modified with ADHERE BONDS – TGL should be applied as directed above. The working time of the polymer modified grout may be shorter than that of the unmodified material, especially in higher temperature. The color of the set grout may appear slightly darker than when unmodified. Use the same mix proportions throughout an installation to ensure uniform color.
Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.