epoxy flooring in chennai

"Further Technical support Call Now"

EPOXY FLOORING

Self Level 1000 Mic / 2000 Mic., is a solvent-free, pigmented three component pure liquid epoxy resin cured of a special amine hardener self-leveling for industrial epoxy flooring.

epoxy-floor-paint

ADHEREX – LB

Low Build Epoxy Coating System is a unique formulation low build epoxy system which produces hard chemical resistant, aesthetically pleasing colored floor coating, dustproof areas for precision assembly sections in Engineering and Electronic industries etc.

  • - Improved aesthetics
  • - Available in various color
  • - Hygienic
  • - Abrasion resistant and smooth..
  • - The surface to be coated must be thoroughly cleaned. If the freshly made surface, it should be ensured that the curing has been done properly. The surface treatment is done by acid treatment and neutralization as per the standard recommendations.
  • - For all cement mortars, it is advisable to first apply a coat of the above mix without the addition of pigment as a primer coat.
  • - The topcoat thereafter can be applied. The additional coat may be given for higher thickness of coating if required. All the three coats thus will yield a draft of around 500 microns.

Potlife for 100gms mix at room temperature (30˚C) is around 50 minutes.

The surface to be coated must be thoroughly cleaned. If the freshly made surface, it should be ensured that the curing has been done properly. The surface treatment is done by acid treatment and neutralization as per the standard recommendations.

Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.