DAMPTITE is a two component epoxy resin based water proofing compound. One part is consisting of epoxy resin and the other part with curing agent. After mixing both the parts it can be thinned down with water. It possesses all the attributes of normal solvent based epoxy compositions such as excellent water and chemical resistance, adhesion, hardness, toughness, and mechanical strength. One of the major advantage of DAMPTITE over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents, it does not pose any health hazard to the applicator. DAMPTITE is completely, consentient & economical to apply.
TECHNICAL INFORMATION CHARACTERISTICS
|Nature :||Two component|
|Mixing Ratio :||Part 1 :Part 2: water 1:1:1 parts by weight|
|Consistency after mixing :||Free flowing smooth paste|
|Application time (pot life) at 30°C :||1 to 1 X hrs.|
|Drying time at 30°C :||5 to 6 hrs|
|Intercoat period at 30°C :
Surface dry :
Hard dry :
|16 to 18 hrs
50 to 60 min
16 to 18 hrs
|Curing time at 30°C :||24 hrs|
DIRECTION FOR USE
Surface preparation first the most important step before application to get result and to avoid failure. The substrate must be clean and free of dirt, paint, oil, grease, sludge, blistered & loose plaster, fungus & moss etc. thorough wire brushing followed by sanding with emery paper is recommended. Remove the dust by compressed air or paint brush or wiping with water soaked cloth.
All previous coating to be completely removed before application of DAMPTITE. When used an on exterior surface must be over coated by weather durable coatings. At low temperature, temperature, drying and curing period will be prolonged. Before mixing both the parts mix them in individual containers.
0.5 KG. 1 KG. 2 KG.