The Versatile, durable, hygienic, hard-wearing, impermeable, epoxy based tile joint grout with high degree of resistant to chemical attack, abrasion and impact, does not permit the entry of bacteria or dirt and is easily maintained in a sterile condition for interior and exterior: for hospitals, laboratories, laundries, kitchens, dairies, breweries, distilleries, refrigerated rooms, toilets, bathrooms, swimming pools, car wash bays etc.
All surfaces must be rigid, dry, clean and sound. Wirebrush the surface and then wash down with water and allow drying. Any voids or defects must be repaired beforehand and allowed to fully set.
Before commencing grouting the adhesive bed must be set. It is essential that the tiles used are appropriate for the service conditions and are fixed in a solid bed of adhesive i.e. ensuring that, as far as possible, no voids are left behind / beneath the tiles. Protect open joints from contamination and ensure that they are clean, dry and free loose debris prior to grouting.
|Joint width||2 - 20 mm|
|Working time at 27°C||45 minutes|
|Setting time at 27°C||48 hours|
|Temperature Resistance||Prolonged 30° to 70°C intermittent up to 100°C|
|Shelf Life||12 months when stored in cool dry place|
ADHERE BONDS-ETG meets the requirements of British standards BS. 5980:1980.
Use Formula (Theoritical)
|((Tile length + Tile breadth) x Tile thickness x Specific gravity)
((Tile length + Joint width) x (Tile breadth + Joint width))
|APPLICATION AREA||ADHERE BONDS-ETG|
|Comp ‘A’||Comp ‘B’||Comp ‘C’|
|For WALL @ 27°C||2||1||10|
|ADHERE BONDS-ETG||5Kg Packing||1Kg Packing|
|COMPOUND-A (RESIN)||1.0 Kg||0.2 Kg|
|COMPOUND-B (HARDENER)||0.5 Kg||0.1 Kg|
|COMPOUND-C (FILLER)||3.5 Kg||0.7 Kg|
Whilst any information and /or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.