ADHEREX - EBA - Epoxy Bonding Agent used for monolithic bond between old and new concrete and highly recommended for structural repair works.
In epoxy modified systems, cement hydration and epoxy polymerization occurs simultaneously. The hardened resin form thin layers on the cement hydrate and binds the hydrates to form a network in which the epoxy phase interweaves through the cement hydrate phase. The epoxy system thus develops high strength and adhesion and has low permeability, good water resistance and chemical resistance.
To obtain good adhesion, it is essential to have a clean and sound substrate. All laitance, oil, grease etc, shall be cleaned by either grinding, wire brushing, chipping, sand blasting or acid etching.
MIXING AND APPLICATION:
The base and hardener in the specified proportion shall be mixed to get a uniform colour. The mixed material shall be applied on the prepared concrete surface with stiff bristled brush. The fresh concrete / cement mortar / guniting shall be carried out on a tack free surface which will be achieved within 30 - 60 minute of application. The new concrete shall be applied within 4 - 6 hours time. For getting best results, the water cement ratio of the new concrete shall be as minimum as possible.
ADHEREX - EBA is compatible with all types of concrete, cement based grouts, polymer modified cement systems etc.
|Full cure & chemical resistance||7 days|
|Overlay time||4 - 6 hours|
|Pot life||30 - 60 min. @30°C|
|Coverage||2 - 2.5 m2/Kg|
12 months from the date of manufacturing in ideal storage conditions.
1, 5 Kgs
Whilst any information and /or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.