ADHEREX - ZRPZinc Rich Epoxy Coating For Reinforcement

Adhere Bonds Chennai

ADHEREX - ZRP is a two pack polyamide atmospheric curing compound and has excellent resistance to corrosion.


  • Excellent protection for steel from corrosion.
  • Recommended for use in saline atmosphere as well as industrial corrosive environments.


ADHEREX - ZRP is zinc rich epoxy coating used as prime coat prior to application of the protective coating.

ADHEREX - ZRP also has high corrosion resistant properties because of the impervious film formed on the surface.


ADHEREX - ZRP is used as a coating for protection of structural steel, M.S. Liners, equipments, conveyors, and storage tanks etc., from chemical and saline environments as in

  • Fertilizer plants
  • Refineries & petrochemical complexes
  • Hydroelectric projects
  • Pulp, paper, rayon units
  • Sugar industries
  • Port (off-shore installations)
  • Bridges, Culverts, flyovers etc.


Remove of rust, mill scales, oil, grease etc before application of ADHEREX - ZRP by sand blasting / acid etching / scrubbing with wire brush / grinding to expose the sound substrate. If surface preparation is not proper the coating will be impaired.


Mix ADHEREX - ZRP resin and hardener agent in prescribed proportion by weight and allow it to remain for 10 minutes.


Apply one coat of ADHEREX - ZRP on the prepared surface, prior to application of ADHERE LB top coat.


Base Epoxy.
Pot Life 1 - 1 ½ hrs @ 30°C
Touch dry 1 ½ hours @ 30°C
Hard dry 7 hours.
Full Curing 7 days.


The working time of ADHEREX - ZRP depends on the temperature at 25˚C is about 45 minutes.


6 - 7 m2/Kg


12 months from the date of manufacturing in ideal storage conditions.


5, 10 Kgs.

Whilst any information and /or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.